Best Plumbing Service Provider: All You Need to Know About Water Heater Repair
Water heating involves the thermodynamic process using energy source for heating water above the initial temperature. There are many domestic uses of hot water which are bathing, cooking, cleaning and space heating. Water is traditionally heated in kettles, water heaters, pot, cauldrons or coppers, but these water vessels do not produce a continual supply of hot water. Water heaters or hot water heaters are the appliances providing a steady supply of hot water. Water repair situations affect electric water heaters that involve an understanding of their mechanisms and requiring purchasing of inexpensive parts. In this article, we will discuss water heater troubleshooting tips to help you locate and resolve water heater issues.
The common issues among water heaters that many of us experience include black or rusty, colored water, foul odor, noisy heating elements, no water, water is not hot enough, takes too long to reheat, water that’s too hot, and leaking pressure relief valve. For water heater that do not have hot water, you need to check the circuit breaker that’s should be a two pole breaker in your circuit breaker panel. It is also a must to check the element, thermostat or limit switch as well as loose wiring. It is essential to check the thermostat, the heating elements, loose wiring and dip tube, if there’s no enough hot water coming out from your water heater. If it takes too long to reheat the water, you can make some simple adjustments in the thermostat, a possible issue with the lower element or sediment build up in the bottom part of the tank. If the water is too hot, check the thermostat that may be set too high, so locate the thermostat and change to appropriate settings. Another possible cause why the water is too hot is malfunctioning of thermostat or a thermostat that’s not sealed properly.
Noisy heating elements may be caused by build up of scale on the elements or having the wrong water heater elements, so it must be either cleaned or replaced. Black or rusty colored water is a result of dissolved anode or scale build up of elements that means the tank starts to rust, so it is better to clean or replace the elements. A foul odor coming out from water heater is caused by bacteria build up in the tank, so flushing of the tank may help, as well as replacement of the anode rod with a different metal. It is easy to repair water heater pressure relief valve by just simply replacing it, and the replacement won’t really take more than an hour. If you’re too busy to undergo a water heater repair, you may contact us to help you out.