How to install a ceiling fan?

Add an instant upgrade to our home’s looked and improve air circulation by installing a ceiling fan. Ceiling fans need to be properly anchored to an electric ceiling box that is designed to hold a heavy fixture. It will not only hold the wiring but also support the full weight of the fan.

If we are swapping a simple light fixture with a ceiling fan, the box will likely need to be replaced with one rated for a ceiling fan. For an easier fan installation in Singapore, consider a quick-install ceiling fan, which installs in just three easy steps. The parts that require assembly simply click into place.

Tips:

•Check the joists for any wiring or plumbing pipes that might be in the way before installing our ceiling fan.

•Make sure the electrical box that holds the ceiling fan in place is fan rated.

•Turn off electrical power to the fan at the electrical panel and use an appropriate testing device to ensure no power is present at the fixture before we begin work. Do not rely on a wall switch to protect us from electrical shock.

•If we are adding a new fan where one did not exist, consult with our local building code department to determine if a permit is required.

Inspect electrical outlets

Inspect the existing junction box to make sure it is rated for ceiling fans. There should be an inscription on the box to indicate this. The box is usually metal. If not, replace it with a fan rated junction box and a fan brace between the ceiling joists to help support the fan’s weight.

Mount the junction box

Insert the fan brace through the hole in the sheetrock and onto the ceiling. The square tube of the brace should be centered with the hole. Rotate the square tube with our hand until the teeth are firmly locked into the joist. Feel around to gauge our results.

Attach the U-bolt bracket to the fan brace. It should be centered in the hole with the bolts facing downward. Thread the cable wire into the junction box. Slip the box up so that the bolts slide through it and tighten the nuts to secure the box into place.

Mount the bracket

Thread the main wires through the center of the mounting bracket. If the fan has a slide-on bracket, you can leave the mounting bolts on the junction box and simply slide the fan bracket over the mounting screws. Tighten them securely. If our fan does not have the slide-on fan bracket, place the fan bracket over the mounting bolts that poke through the bracket and fasten it with the nuts provided.

Set the down rod

Using a flat surface, slip the canopy onto the down rod and run the main wires through. Insert the clevis and cotter pins to the down rod, so that it connects to the fan’s base. Attach the bulb-shaped fitting at the top of the down rod to the mounting bracket on the ceiling.

Wire the ceiling fan

Connect the fan wires to our household wiring. Some fans come with additional wires, so be sure to follow our owner’s manual for specific instructions. Use the wire nuts supplied with our fan kit to secure the wires. Match up the wires: In many cases, the fan’s copper or green insulated wire connects with the ground wire. The fan’s motor black wire connects with the supply black wire. The fan’s light kit wires, blue or striped, also connect with the supply black wires. The fan’s motor white wire connects with the supply white, or neutral, wire.

Once these wires are securely connected, push them into the junction box. Use wire cutters to cut the wires if they cannot fit into the box. This will keep them from vibrating against the canopy when the fan is running. Clip the canopy onto the mounting bracket and tighten the screws.

Attach the blades and bulbs

Some fans have quick-install blades that can make the installation faster. Simply align the blade arm posts through the blade keyhole slots and slide them outward until they click and lock into place. For fans without quick-install blades, screw the fan blades onto the blade arms. The side of the blade that we want to be shown should face downward.

Ceiling fans with accu-arm blade brackets can also speed up installation. These brackets come with the blade screws attached. Also, there’s an alignment post on the bracket that will help in mounting the blade arm without stripping the mounting hole. For fans without the Accu-arm feature, fasten the blade assembly to the motor with two screws. Drive the screws in slowly to avoid stripping and bending the blades, and tighten securely.

Install the globe and light bulbs that may be included in our kit. Restore power, turn on the fan and enjoy the breeze! To read more about ceiling fan installation cost in Singapore check here.